If not done, correctly, then there’s every chance of your device ending up in a soft brick or bootloop state. As a result of this, you wouldn’t be able to access the OS and Fastboot Mode will be the only accessible mode. And to be fair, this is the only mode that we would need to bring your device back to life. So without further ado, let’s show you the steps to unbrick any Xiaomi/Poco/Redmi device via Mi Flash Tool.
How to Unbrick any Xiaomi/Redmi/Poco via Mi Flash Tool
The below instructions are listed under separate sections for ease of understanding. Make sure to follow the same sequence as mentioned. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
Prerequisites
The below process will wipe off all the data on your device, while you might not be in a position to take a backup, but still, it’s better to have yourself acquainted with this fact.Moreover, this process is applicable on soft brick or bootloop devices, you wouldn’t be able to carry out these steps on a hard-bricked state. In other words, you could only carry out this process if your device is able to boot to the Fastboot Mode [as explained in STEP 4].Likewise, the bootloader on your device needs to be unlocked beforehand. [If the bootloader is locked, then you wouldn’t be able to carry out this process, even if you could access Fastboot Mode. This is because the unlocking process requires you to enable OEM Unlocking, which isn’t possible in the current state of the device].
Now that you are acquainted with all the requirements, let’s get started with the steps to unbrick any Xiaomi/Poco/Redmi device via Mi Flash Tool. Follow along.
How to Unbrick any Xiaomi/Redmi/Poco via Mi Flash Tool
The below process will wipe off all the data from your device, so please take a complete device backup beforehand. Droidwin and its members wouldn’t be held responsible in case of a thermonuclear war, your alarm doesn’t wake you up, or if anything happens to your device and data by performing the below steps.
STEP 1: Install Android SDK Platform Tools
First and foremost, you will have to install the Android SDK Platform Tools on your PC. This is the official ADB and Fastboot binary provided by Google and is the only recommended one. So download it and then extract it to any convenient location on your PC. Doing so will give you the platform tools folder, which will be used throughout this guide.
STEP 2: Download Mi Flash Tool
Next up, grab hold of the Mi Flash Tool from here. We will be using this tool to go back to Stock MIUI from the current custom ROM. Once you have downloaded the tool, extract it to any convenient location on your PC.
STEP 3: Download and Extract Fastboot ROM
You may now download the Fastboot ROM corresponding to your device from the official site or third-party site of your choice [such as Xiaomi Firmware Updater]. The firmware will be downloaded in TGZ format, so you will have to extract like using an archive utility app like 7ZIP. Here’s how it could be done:
STEP 4: Boot the Device to Fastboot Mode
Generally, you could boot your device to Fastboot Mode via the adb reboot bootloader command. But since your device is currently bricked, you wouldn’t be able to execute this command [as you can not enable USB Debugging]. Therefore, you will have to take the help of hardware key combinations to get this job done. So power off your device. Then press and hold the Power and Volume down keys for a few seconds and your device will subsequently boot to the Fastboot Mode.
STEP 5: Verify Fastboot Mode
Now that your device is now booted to the Fastboot Mode, let’s verify if your PC is able to identify the device in this mode or not.
STEP 6: Install Xiaomi USB Drivers [If needed]
In most cases, the Xiaom drivers are automatically installed the first time you connect your device to your PC. However, let’s manually install them to be on the safer side. So launch the Mi Flash Tool via the XiaoMiFlash.exe file. Then go to the Driver tab and click Install. That’s it. Once these drivers are installed, you could now start the process to go back to Stock MIUI from the current custom ROM on your Xiaomi device.
STEP 7: Install MIUI Fastboot ROM via Mi Flash Tool
These were the steps to unbrick your Xiaomi/Redmi/Poco device via Mi Flash Tool. If you have any queries concerning the aforementioned steps, do let us know in the comments. We will get back to you with a solution at the earliest. We have selected “Clean All” as it is the safest approach. If everything works well and good and your device boots to the OS, then you could easily lock the bootloader later on [if needed]. But if you relock it right now and something goes wrong during the flashing, then it could spell out trouble for you. Therefore, it is always recommended to select “Clean All”. If we talk about “save user data”, then more often than not, it prevents the booting of the device due to encryption of the device or corrupt data. So it’s best to take a backup beforehand and select “Clean All”. Once the flashing is done, Mi Flash Tool might display the “error:Not catch checkpoint ($fastboot -s .*lock), flash is not done”. It’s not a cause for concern and the flashing has infact been successfully completed. But still, if you want to know the detailed reasoning behind it and the steps to rectify it, then do check out our guide.
How to Flash Xiaomi Fastboot ROM without Mi Flash ToolWhat is Xiaomi EU ROM | How to Flash Xiaomi EU ROMUnbrick any Redmi Note series device via MTK ClientUnbrick Xiaomi MediaTek Devices using MTK Exploit
About Chief Editor
